The QTextStream class provides a convenient interface for reading and writing text. 更多...
The QTextStream class provides a convenient interface for reading and writing text.
QTextStream 可以操作 QIODevice ， QByteArray 或 QString . Using QTextStream's streaming operators, you can conveniently read and write words, lines and numbers. For generating text, QTextStream supports formatting options for field padding and alignment, and formatting of numbers. 范例：
QFile data("output.txt"); if (data.open(QFile.WriteOnly | QFile.Truncate)) { QTextStream out(&data); out << "Result: " << qSetFieldWidth(10) << left << 3.14 << 2.7; // writes "Result: 3.14 2.7 " }
It's also common to use QTextStream to read console input and write console output. QTextStream is locale aware, and will automatically decode standard input using the correct codec. 范例：
QTextStream stream(stdin); QString line; do { line = stream.readLine(); } while (!line.isNull());
Besides using QTextStream's constructors, you can also set the device or string QTextStream operates on by calling setDevice () 或 setString (). You can seek to a position by calling seek ()，和 atEnd () will return true when there is no data left to be read. If you call flush (), QTextStream will empty all data from its write buffer into the device and call flush () on the device.
Internally, QTextStream uses a Unicode based buffer, and QTextCodec is used by QTextStream to automatically support different character sets. By default, QTextCodec.codecForLocale () is used for reading and writing, but you can also set the codec by calling setCodec (). Automatic Unicode detection is also supported. When this feature is enabled (the default behavior), QTextStream will detect the UTF-16 or the UTF-32 BOM (Byte Order Mark) and switch to the appropriate UTF codec when reading. QTextStream does not write a BOM by default, but you can enable this by calling setGenerateByteOrderMark(true). When QTextStream operates on a QString directly, the codec is disabled.
There are three general ways to use QTextStream when reading text files:
Since the text stream uses a buffer, you should not read from the stream using the implementation of a superclass. For instance, if you have a QFile and read from it directly using QFile.readLine () instead of using the stream, the text stream's internal position will be out of sync with the file's position.
By default, when reading numbers from a stream of text, QTextStream will automatically detect the number's base representation. For example, if the number starts with "0x", it is assumed to be in hexadecimal form. If it starts with the digits 1-9, it is assumed to be in decimal form, and so on. You can set the integer base, thereby disabling the automatic detection, by calling setIntegerBase (). 范例：
QTextStream in("0x50 0x20"); int firstNumber, secondNumber; in >> firstNumber; // firstNumber == 80 in >> dec >> secondNumber; // secondNumber == 0 char ch; in >> ch; // ch == 'x'
QTextStream supports many formatting options for generating text. You can set the field width and pad character by calling setFieldWidth () 和 setPadChar ()。使用 setFieldAlignment () to set the alignment within each field. For real numbers, call setRealNumberNotation () and setRealNumberPrecision () to set the notation ( SmartNotation , ScientificNotation , FixedNotation ) and precision in digits of the generated number. Some extra number formatting options are also available through setNumberFlags ().
像 <iostream> in the standard C++ library, QTextStream also defines several global manipulator functions:
| 操作符 | 描述 |
|---|---|
| bin | Same as setIntegerBase(2). |
| oct | Same as setIntegerBase(8). |
| dec | Same as setIntegerBase(10). |
| hex | Same as setIntegerBase(16). |
| showbase | Same as setNumberFlags( numberFlags () | ShowBase ). |
| forcesign | Same as setNumberFlags( numberFlags () | ForceSign ). |
| forcepoint | Same as setNumberFlags( numberFlags () | ForcePoint ). |
| noshowbase | Same as setNumberFlags( numberFlags () & ~ ShowBase ). |
| noforcesign | Same as setNumberFlags( numberFlags () & ~ ForceSign ). |
| noforcepoint | Same as setNumberFlags( numberFlags () & ~ ForcePoint ). |
| uppercasebase | Same as setNumberFlags( numberFlags () | UppercaseBase ). |
| uppercasedigits | Same as setNumberFlags( numberFlags () | UppercaseDigits ). |
| lowercasebase | Same as setNumberFlags( numberFlags () & ~ UppercaseBase ). |
| lowercasedigits | Same as setNumberFlags( numberFlags () & ~ UppercaseDigits ). |
| fixed | Same as setRealNumberNotation( FixedNotation ). |
| scientific | Same as setRealNumberNotation( ScientificNotation ). |
| left | Same as setFieldAlignment( AlignLeft ). |
| right | Same as setFieldAlignment( AlignRight ). |
| center | Same as setFieldAlignment( AlignCenter ). |
| endl | Same as operator<<('\n') and flush (). |
| flush | 如同 flush (). |
| reset | 如同 reset (). |
| ws | 如同 skipWhiteSpace (). |
| bom | Same as setGenerateByteOrderMark(true). |
In addition, Qt provides three global manipulators that take a parameter: qSetFieldWidth (), qSetPadChar ()，和 qSetRealNumberPrecision ().
This enum specifies how to align text in fields when the field is wider than the text that occupies it.
| 常量 | 值 | 描述 |
|---|---|---|
| QTextStream.AlignLeft | 0 | Pad on the right side of fields. |
| QTextStream.AlignRight | 1 | Pad on the left side of fields. |
| QTextStream.AlignCenter | 2 | Pad on both sides of field. |
| QTextStream.AlignAccountingStyle | 3 | Same as AlignRight, except that the sign of a number is flush left. |
另请参阅 setFieldAlignment ().
This enum specifies various flags that can be set to affect the output of integers, float s, and double s.
| 常量 | 值 | 描述 |
|---|---|---|
| QTextStream.ShowBase | 0x1 | Show the base as a prefix if the base is 16 ("0x"), 8 ("0"), or 2 ("0b"). |
| QTextStream.ForcePoint | 0x2 | Always put the decimal separator in numbers, even if there are no decimals. |
| QTextStream.ForceSign | 0x4 | Always put the sign in numbers, even for positive numbers. |
| QTextStream.UppercaseBase | 0x8 | Use uppercase versions of base prefixes ("0X", "0B"). |
| QTextStream.UppercaseDigits | 0x10 | Use uppercase letters for expressing digits 10 to 35 instead of lowercase. |
The NumberFlags type is a typedef for QFlags <NumberFlag>. It stores an OR combination of NumberFlag values.
另请参阅 setNumberFlags ().
This enum specifies which notations to use for expressing float and double as strings.
| 常量 | 值 | 描述 |
|---|---|---|
| QTextStream.ScientificNotation | 2 | Scientific notation ( printf() 's %e 标志)。 |
| QTextStream.FixedNotation | 1 | Fixed-point notation ( printf() 's %f 标志)。 |
| QTextStream.SmartNotation | 0 | Scientific or fixed-point notation, depending on which makes most sense ( printf() 's %g 标志)。 |
另请参阅 setRealNumberNotation ().
此枚举描述文本流的当前状态。
| 常量 | 值 | 描述 |
|---|---|---|
| QTextStream.Ok | 0 | The text stream is operating normally. |
| QTextStream.ReadPastEnd | 1 | The text stream has read past the end of the data in the underlying device. |
| QTextStream.ReadCorruptData | 2 | The text stream has read corrupt data. |
| QTextStream.WriteFailed | 3 | The text stream cannot write to the underlying 设备。 |
另请参阅 status ().
构造 QTextStream . Before you can use it for reading or writing, you must assign a device or a string.
另请参阅 setDevice () 和 setString ().
构造 QTextStream that operates on device .
构造 QTextStream that operates on fileHandle ，使用 openMode to define the open mode. Internally, a QFile is created to handle the FILE pointer.
This constructor is useful for working directly with the common FILE based input and output streams: stdin, stdout and stderr. 范例：
QString str; QTextStream in(stdin); in >> str;
构造 QTextStream that operates on string ，使用 openMode to define the open 模式。
Returns true if there is no more data to be read from the QTextStream ；否则返回 false. This is similar to, but not the same as calling QIODevice.atEnd (), as QTextStream also takes into account its internal Unicode buffer.
Returns true if automatic Unicode detection is enabled, otherwise returns false. Automatic Unicode detection is enabled by default.
另请参阅 setAutoDetectUnicode () and setCodec ().
Returns the codec that is current assigned to the stream.
另请参阅 setCodec (), setAutoDetectUnicode (), and locale ().
返回被当前设备关联的 QTextStream , or 0 if no device has been assigned.
另请参阅 setDevice () 和 string ().
Returns the current field alignment.
另请参阅 setFieldAlignment () 和 fieldWidth ().
Returns the current field width.
另请参阅 setFieldWidth ().
Flushes any buffered data waiting to be written to the 设备。
若 QTextStream operates on a string, this function does nothing.
返回 true 若 QTextStream is set to generate the UTF BOM (Byte Order Mark) when using a UTF codec; otherwise returns false. UTF BOM generation is set to false 在默认情况下。
另请参阅 setGenerateByteOrderMark ().
Returns the current base of integers. 0 means that the base is detected when reading, or 10 (decimal) when generating numbers.
另请参阅 setIntegerBase (), QString.number ()，和 numberFlags ().
Returns the locale for this stream. The default locale is C.
该函数在 Qt 4.5 引入。
另请参阅 setLocale ().
Returns the current number flags.
另请参阅 setNumberFlags (), integerBase ()，和 realNumberNotation ().
Returns the current pad character.
另请参阅 setPadChar () 和 setFieldWidth ().
Returns the device position corresponding to the current position of the stream, or -1 if an error occurs (e.g., if there is no device or string, or if there's a device error).
因为 QTextStream is buffered, this function may have to seek the device to reconstruct a valid device position. This operation can be expensive, so you may want to avoid calling this function in a tight loop.
该函数在 Qt 4.2 引入。
另请参阅 seek ().
读取最多 maxlen characters from the stream, and returns the data read as a QString .
该函数在 Qt 4.1 引入。
另请参阅 readAll (), readLine ()，和 QIODevice.read ().
Reads the entire content of the stream, and returns it as a QString . Avoid this function when working on large files, as it will consume a significant amount of memory.
调用 readLine () 是 better if you do not know how much data is available.
另请参阅 readLine ().
Reads one line of text from the stream, and returns it as a QString . The maximum allowed line length is set to maxlen . If the stream contains lines longer than this, then the lines will be split after maxlen characters and returned in parts.
若 maxlen is 0, the lines can be of any length. A common value for maxlen is 75.
The returned line has no trailing end-of-line characters ("\n" or "\r\n"), so calling QString.trimmed () is unnecessary.
If the stream has read to the end of the file, readLine() will return a null QString . For strings, or for devices that support it, you can explicitly test for the end of the stream using atEnd ().
另请参阅 readAll () and QIODevice.readLine ().
Returns the current real number notation.
另请参阅 setRealNumberNotation (), realNumberPrecision (), numberFlags ()，和 integerBase ().
Returns the current real number precision, or the number of fraction digits QTextStream will write when generating real numbers.
另请参阅 setRealNumberPrecision (), setRealNumberNotation (), realNumberNotation (), numberFlags ()，和 integerBase ().
Resets QTextStream 's formatting options, bringing it back to its original constructed state. The device, string and any buffered data is left untouched.
Resets the status of the text stream.
该函数在 Qt 4.1 引入。
另请参阅 QTextStream.Status , status ()，和 setStatus ().
Seeks to the position pos in the device. Returns true on success; otherwise returns false.
若 enabled is true, QTextStream will attempt to detect Unicode encoding by peeking into the stream data to see if it can find the UTF-16 or UTF-32 BOM (Byte Order Mark). If this mark is found, QTextStream will replace the current codec with the UTF codec.
This function can be used together with setCodec (). It is common to set the codec to UTF-8, and then enable UTF-16 detection.
另请参阅 autoDetectUnicode () 和 setCodec ().
Sets the codec for this stream to codec . The codec is used for decoding any data that is read from the assigned device, and for encoding any data that is written. By default, QTextCodec.codecForLocale () is used, and automatic unicode detection is enabled.
若 QTextStream operates on a string, this function does nothing.
警告： If you call this function while the text stream is reading from an open sequential socket, the internal buffer may still contain text decoded using the old codec.
另请参阅 codec (), setAutoDetectUnicode (), and setLocale ().
Sets the codec for this stream to the QTextCodec 为指定编码通过 codecName 。常见值对于 codecName include "ISO 8859-1", "UTF-8", and "UTF-16". If the encoding isn't recognized, nothing happens.
范例：
QTextStream out(&file); out.setCodec("UTF-8");
另请参阅 QTextCodec.codecForName () 和 setLocale ().
把当前设备设为 device . If a device has already been assigned, QTextStream will call flush () before the old device is replaced.
注意： This function resets locale to the default locale ('C') and codec to the default codec, QTextCodec.codecForLocale ().
另请参阅 device () and setString ().
Sets the field alignment to mode . When used together with setFieldWidth (), this function allows you to generate formatted output with text aligned to the left, to the right or center aligned.
另请参阅 fieldAlignment () 和 setFieldWidth ().
Sets the current field width to width 。若 width is 0 (the default), the field width is equal to the length of the generated text.
注意： The field width applies to every element appended to this stream after this function has been called (e.g., it also pads endl). This behavior is different from similar classes in the STL, where the field width only applies to the next element.
另请参阅 fieldWidth () 和 setPadChar ().
若 generate is true and a UTF codec is used, QTextStream will insert the BOM (Byte Order Mark) before any data has been written to the device. If generate is false, no BOM will be inserted. This function must be called before any data is written. Otherwise, it does nothing.
另请参阅 generateByteOrderMark () and bom ().
Sets the base of integers to base , both for reading and for generating numbers. base can be either 2 (binary), 8 (octal), 10 (decimal) or 16 (hexadecimal). If base is 0, QTextStream will attempt to detect the base by inspecting the data on the stream. When generating numbers, QTextStream assumes base is 10 unless the base has been set explicitly.
另请参阅 integerBase (), QString.number ()，和 setNumberFlags ().
Sets the locale for this stream to locale 。指定 locale is used for conversions between numbers and their string representations.
The default locale is C and it is a special case - the thousands group separator is not used for backward compatibility reasons.
该函数在 Qt 4.5 引入。
另请参阅 locale ().
Sets the current number flags to flags . flags 是 set of flags from the NumberFlag enum, and describes options for formatting generated code (e.g., whether or not to always write the base or sign of a number).
另请参阅 numberFlags (), setIntegerBase ()，和 setRealNumberNotation ().
Sets the pad character to ch . The default value is the ASCII space character (' '), or QChar (0x20). This character is used to fill in the space in fields when generating text.
范例：
QString s; QTextStream out(&s); out.setFieldWidth(10); out.setFieldAlignment(QTextStream.AlignCenter); out.setPadChar('-'); out << "Qt" << "rocks!";
字符串 s contains:
----Qt------rocks!--
另请参阅 padChar () and setFieldWidth ().
Sets the real number notation to notation ( SmartNotation , FixedNotation , ScientificNotation ). When reading and generating numbers, QTextStream uses this value to detect the formatting of real numbers.
另请参阅 realNumberNotation (), setRealNumberPrecision (), setNumberFlags ()，和 setIntegerBase ().
Sets the precision of real numbers to precision . This value describes the number of fraction digits QTextStream should write when generating real numbers.
The precision cannot be a negative value. The default value is 6.
另请参阅 realNumberPrecision () and setRealNumberNotation ().
Sets the status of the text stream to the status 给定。
Subsequent calls to setStatus() are ignored until resetStatus () 被调用。
该函数在 Qt 4.1 引入。
另请参阅 状态 , status ()，和 resetStatus ().
Sets the current string to string ，使用给定 openMode . If a device has already been assigned, QTextStream will call flush () before replacing it.
另请参阅 string () and setDevice ().
Reads and discards whitespace from the stream until either a non-space character is detected, or until atEnd () returns true. This function is useful when reading a stream character by character.
Whitespace characters are all characters for which QChar.isSpace () returns true.
另请参阅 operator>> ().
返回文本流的状态。
另请参阅 QTextStream.Status , setStatus ()，和 resetStatus ().
Returns the current string assigned to the QTextStream , or 0 if no string has been assigned.
另请参阅 setString () 和 device ().
This method is only available if the QtXml module is imported.
This method is only available if the QtGui module is imported.
This method is only available if the QtGui module is imported.
